FEATURES
- 43 m main boom , two section jibs (9.5m, 16m).
- Optimised central slewing position increases the lifting capacity of the crane over rear.
- Large outrigger span improves the working stability of the crane greatly,
- Adopt internationally advanced structure analysis and calculation methods to develop the lifting capacity of crane deeply.
- Leading boom manufacturing process in trade.
PRODUCT SPECIFICATIONS
| Item | Unit | Value | Remarks | |
| Working performance | Max. rated lifting capacity | kg | 55000 | |
| Max. load moment of basic boom | kN.m | 2009 | ||
| Max. load moment of main boom(fully extended) | kN.m | 1050 | ||
| Max. load moment of basic boom | m | 12.6 | ||
| Max. lifting height of main boom | m | 43.6 | These parameters do not include deflection of main boom and jib | |
| Max. lifting height of jib | m | 58 | ||
| Working speeds | Max. hoist rope speed(Main winch) | m/min | 120 | |
| Max. hoist rope speed(Auxiliary winch) | m/min | 120 | ||
| Boom demrricking up time | s | 50 | ||
| Boom demrricking up time | s | 95 | ||
| Slewing speed | r/min | 0-2.2 | ||
| Driving parameters | Max. height above sea level | m | 2000 | |
| Max. driving speed | km/h | 76 | ||
| Max. gradeability | % | 40 | ||
| Min. turning diameter | m | ≤24 | ||
| Min. ground clearance | mm | 260 | ||
| Oil consumption per hundred kilometers | L | 43 | ||
| Mass | Deadweight in driving condition | kg | 42000 | |
| Complete vehicle kerb mass | kg | 41870 | ||
| Front axle load | kg | 16000 | ||
| Rear axle load | kg | 26000 | ||
| Dimensions | Overall dimensions(L×W×H) | mm | 13700×2800×3800 | |
| Outrigger spread(L) | m | 5.92 | ||
| Outrigger spread(W) | m | Fully extended:7.1,intermediately extended:4.8 | ||
| Tail slewing radius | mm | 3900 | ||
| Main boom length | m | 11.4 – 43.0 | ||
| Boom angle | ° | -82 | ||
| jib length | m | 9.2,14.6 | Low-mounted, open-type | |
| Offset | ° | 5、25、45 | ||
* The images used are for reference only and may not reflect the product exactly. Machines shown may not include optional accessories.
All specifications, features and descriptions of the products are subject to change without prior notice.
The Powertrac Logo™, and the Powertrac ® Heavy Equipment & Machineries are a registered trademark of Powertrac, Inc.
All other trademarks belong to their respective owners.
COPYRIGHT WARNING
Any unauthorized reproduction or distribution of a copyrighted work is illegal under the Republic Act No. 8293 or the Intellectual Property Code of The Philippines.
Criminal copyright infringement, including infringement without monetary gain, is Punishable by up to Six (6) years in Prison and a Fine of up to P 1,500,000.00.
Violators will be prosecuted to the fullest extent of the law.
